All Products
-
Shutter Door Roll Forming Machine
-
Door Frame Roll Forming Machine
-
Roof Panel Roll Forming Machine
-
Tile Roll Forming Machine
-
Round Pipe Roll Forming Machine
-
Purlin Roll Forming Machine
-
Guard Rails Roll Forming Machine
-
Double Layer Roll Forming Machine
-
Cold Roll Forming Machine
-
Floor Deck Roll Forming Machine
-
Metal Embossing Machine
Keywords [ highway guardrail forming machine ] match 10 Products.
Galvanized Steel Sheet 2 Wave Highway Guardrail Forming Machine / Curving Machine
| Material Of Rollers: | GCR15, HRC60 Degree |
|---|---|
| Diameter Of Shaft: | 80mm |
| Color: | To Be Customized |
Single Skin Door Panel Cold Roll Forming Machine Width From 400mm To 600mm
| Material Of Rollers: | GR15; HRC60 Degree |
|---|---|
| Working Speed: | 5~15m/min |
| Cassette Type: | Stand |
Color Steel Glazed Tile Cold Roll Forming Machine 5.5 Kw Main Motor Power
| Rollers Material: | Gcr15 |
|---|---|
| Hardness: | 58~62 Degree |
| Working Speed: | 10~20m/min |
Fully Automatic Metal Rolling Shutters Cold Roll Forming Machine With Working Thickness 0.7~1.2mm
| Material Of Rollers: | GCR15, HRC60 Degree |
|---|---|
| Control System: | PLC, To Be Customized |
| Perforation: | To Be Customized |
A Complete Set Cold Roll Forming Machine / Roller Shutter Door Machine
| Thickness Of Input Sheet: | 0.7~1.2mm |
|---|---|
| Rollers Material: | Gcr15 |
| Cutting Mould Material: | H13 |
21KW 45# Steel Sigma Profile Cold Roll Forming Equipment With 16 Steps Forming Station
| Material Of Rollers: | GCR15, HRC58~62 DEGREE |
|---|---|
| Transmission: | Gear Box With Universal Joint |
| Color: | To Be Customized |
Industrial Rack Shelving Box Beam Cold Roll Former With 4 Box Interlock Machine Forming Stations
| Material: | PPGI And GI |
|---|---|
| Rollers Material: | Gcr15 |
| Hardness: | 58~60 Degree |
Galvanized Steel Sheet 2 Wave Guard Rails Roll Forming Machine for Curvinging Highway
| Material: | Galvanized Steel |
|---|---|
| Input Sheet Thickness: | 2.0~4.0mm |
| Rollers Material: | SKD11 Or CR15 |
16 Steps Station Sigma Section Guard Rails Roll Forming Machine With CE LB-SG100
| Guarantee: | 5 Years |
|---|---|
| Material: | Galvanized Steel |
| Input Sheet Thickness: | 2.0~4.0mm |
Post Profile Highway Guard Rails Roll Forming Machine PLC Control
| Customized Pattern: | PLC Control, Automatic Cutting |
|---|---|
| Any Profile: | Special Profile, CE , Blue And Yellow, Servo Control, PLC |
| Packaging Details: | water proof package |
1