All Products
-
Shutter Door Roll Forming Machine
-
Door Frame Roll Forming Machine
-
Roof Panel Roll Forming Machine
-
Tile Roll Forming Machine
-
Round Pipe Roll Forming Machine
-
Purlin Roll Forming Machine
-
Guard Rails Roll Forming Machine
-
Double Layer Roll Forming Machine
-
Cold Roll Forming Machine
-
Floor Deck Roll Forming Machine
-
Metal Embossing Machine
PLC Control Dual Level Roll Forming Machine With Manual / Automatic Decoiler
| Rollers Material: | Gcr15 |
|---|---|
| Hardness: | 55~58 Degree |
| Working Speed: | 10~20m/min |
Custom High Speed Double Layer Roll Forming Machine For Roof And Wall Panel
| Rollers Material: | Gcr15 |
|---|---|
| Working Speed: | 10~20m/min |
| Hardness: | 55~58 Degree |
5.5KW High Speed Double Deck Roll Forming Machine With Automatic Hydraulic Cutting
| Rollers Material: | Gcr15 |
|---|---|
| Hardness: | 55~58 Degree |
| Working Speed: | 10~20m/min |
18 Forming Stations Automatic Double Layer Roll Forming Machine With PLC Control
| Rollers Material: | Gcr15 |
|---|---|
| Hardness: | 55~58 Degree |
| Working Speed: | 10·20m/min |
0.3 - 0.8mm Thickness Double Layer Roll Forming Machine For Roof Panel
| Rollers Material: | Gcr15 |
|---|---|
| Hardness: | 55~58 Degree |
| Motor Power: | 5.5KW;380V;50HZ;3 PHASE |
PLC Frequency Control System Metal Roofing Forming Machine Double Layer
| Rollers Material: | Gcr15 And #45 |
|---|---|
| Hardness: | 55~58 Degree |
| Motor Power: | 5.5KW;380V;50HZ; 3 PHASE |
0 - 15m/min PLC Double Layer Roll Forming Machine For Two Roofing Profiles
| Rollers Material: | GCR15 |
|---|---|
| Hardness: | 55~58 Degree |
| Chrome Coated: | 0.03mm Thickness |
Double Layer Metal Roofing Roll Forming Machine For Roof Cladding , Wall Cladding
| Rollers Material: | GCR15 |
|---|---|
| Hardness: | 55~58 Degree |
| Motor Power: | 5.5KW 380V 3 Phase |
Double Layer Corrugated Sheet Roll Forming Machine For Two Different Profiles
| Rollers Material: | GCR15 OR #45 |
|---|---|
| Working Speed: | 10~20m/min |
| PLC: | Automatic |
Galvanized Steel Double Layer Roll Forming Machine With HRC50 - 60 Heat Treatment
| Double Layer Sheet: | 0.3~0.8mm |
|---|---|
| Hydraulic Decoiler: | 5 Tons And 10 Tons |
| Motor Power: | 5.5KW |