All Products
-
Shutter Door Roll Forming Machine
-
Door Frame Roll Forming Machine
-
Roof Panel Roll Forming Machine
-
Tile Roll Forming Machine
-
Round Pipe Roll Forming Machine
-
Purlin Roll Forming Machine
-
Guard Rails Roll Forming Machine
-
Double Layer Roll Forming Machine
-
Cold Roll Forming Machine
-
Floor Deck Roll Forming Machine
-
Metal Embossing Machine
Keywords [ sheet metal forming machine ] match 36 Products.
Metal Roof Panel Roll Forming Machine with 6m Auto Stacker LB30-200-1000
| Material: | PPGI And Galvanized Steel |
|---|---|
| Input Sheet Thickness: | 0.3~0.8mm |
| Guarantee: | 5 Years |
Hydraulic Trapezoidal Roof Panel Roll Forming Machine Coil Width 1250mm LB35-200-1000
| Material: | PPGI And Galvanized Steel |
|---|---|
| Input Thickness: | 0.3~0.8mm |
| Guarantee: | 5 Years |
Octagaonal Tube Metal Roll Forming Machines Input Galvanized Steel Sheet
| Material: | Galvanized Steel |
|---|---|
| Rollers Material: | SKD11 Or CR15 Mould Steel |
| Hardness: | HRC58~62 Degree, Chromed |
0-12m/Min Sheet Metal Roll Forming Machines Material PPGI , Color Steel , GI
| Guarantee: | 5 Years |
|---|---|
| Color: | To Be Customized |
| Material Of Rollers: | #45 |
Chain Drive Roof Panel Roll Forming Machine With Touch Screen PLC Frequency Control System
| Material: | PPGI |
|---|---|
| Input Sheet Thickness: | 0.3~0.8mm |
| Material Of Rollers: | #45 |
High Speed Roof Panel Roll Forming Machine With Chain Drive PLC Control
| Material: | PPGI And Galvanized Steel |
|---|---|
| Guarantee: | 5 Years |
| Material Of Rollers: | #45 |
Speed 0-15m/Min Sheet Metal Roll Forming Machines / Metal Roofing Equipment
| Material: | PPGI |
|---|---|
| Input Sheet Thickness: | 0.3~0.8mm |
| Guarantee: | 5 Years |
Chain Drive Roofing Tile Forming Machine With Fully Automatic Control
| Material: | PPGI |
|---|---|
| Input Sheet Thickness: | 0.3~0.8mm |
| Guarantee: | 5 Years |
PLC Frequency Control System Metal Roofing Forming Machine Double Layer
| Rollers Material: | Gcr15 And #45 |
|---|---|
| Hardness: | 55~58 Degree |
| Motor Power: | 5.5KW;380V;50HZ; 3 PHASE |
5.5KW High Speed Double Deck Roll Forming Machine With Automatic Hydraulic Cutting
| Rollers Material: | Gcr15 |
|---|---|
| Hardness: | 55~58 Degree |
| Working Speed: | 10~20m/min |